Uniden BCT-10 - Manual (Page 9)

Windshield Mounting
1. Find a good position for the BCT-10 on your windshield. Refer
to the Helpful Tips on page 5 for some guidelines on mounting
positions.
2. Put the metal
mounting
bracket on
the
windshield to
adjust it for
best position.
3. If necessary, adjust the metal
mounting bracket so that
when you slide the BCT-10
onto it, it is parallel to the
road surface and fits flush
against the windshield. Your
BCT-10 should look like the
example at the right once it
is installed.
Caution: Do Not adjust the metal mounting bracket with the
BCT-10 attached. Doing so can cause damage to the
bracket and the unit.
1
2
3 4
1. Windshield
2. Road Surface
3. Metal Mounting
Bracket
4. Metal Mounting
Bracket
parallel to road
VOLUME
OFF
VOLUME
OFF
VOLUME
OFF
Installation
9