Т³гж 4 – Techko AUTOTECH AF240 User Manual
Page 4

3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
3. Manual Feed Shredding: 
 15 Sheets maximum per pass 
 of 20lb paper
4. Credit Card: 1 Pc. Maximum 
 CD/DVD: 1 Pc. Maximum 
Do not use solvents, cleaning degreasers or any chemicals to clean the 
shredder.
NO CHILD
Shred paper, CDs/DVDs and credit cards only.
Product is not intended for use by children (product is not a toy). Keep children 
and pets away from shredder.
C
R
E
D
IT
C
A
R
D
OPERATION DIAGRAM
If the paper is wider than the feed entry and is folded to fit, the paper thickness 
increases and may exceed the recommended capacity.
If the basket is not pushed in all the way the shredder will not operate.
If the cycle time is exceeded the shredder will automatically shut down until it is 
safe to resume shredding. Cycle time:30 minutes.
If the shredder is over loaded and jammed, a red light will flash and the shredder 
will automatically reverse to pull the paper back out. Reduce the amount of 
paper and feed it through again.
Do not shred envelopes, labels or paper with labels affixed to them. This will 
gum up the cutting blades, cause the shredder to malfunction, and void your 
warranty.
Please observe all printed precautions and warnings. 
IMPORTANT NOTES
2. When using the auto feed tray, you must push 
 the paper loading button and slide the paper 
 down into the slot.
 Auto Feed Shredding: 240 Sheets maximum of 
 20 lb paper Multiple sheet pulling 
 system pulls 6-9 sheets a at time. 
9. Do not alter or deface the shredder or shredder housing in any way. Do not
attempt to service the shredder yourself. Opening and/or removing covers 
could expose you to dangerous voltage points and/or other serious risks. 
These actions will also void your warranty.
10. Always unplug the shredder from the wall outlet before cleaning. Clean the
outside of the shredder with a damp cloth only. Do Not immerse in water or 
use household cleaners, lubricants, or alcohol on or near the shredder. Never 
use any type of compressed air aerosols, or any product marked flammable to 
clean the shredder. Some agents may combust causing serious injury. Using 
a vacuum to suck excess debris from the throat or blades is acceptable. 
11. Do not remove any warning stickers or labels from the shredder.
12. Only operate the shredder from a power source indicated on the marking
label. If you are unsure of the power source, consult your dealer or local 
electric company.
13. Do not rest any objects on the power supply cord. Do not place the shredder
in an area where people may walk on or over the power supply cord.
14. If an extension cord is used, ensure that the total amperage ratings of the
products plugged into the extension cord do not exceed the extension cord 
rating. Ensure that the total of all items plugged into the wall outlet does not 
exceed fifteen (15) amperages.
15. This shredder should only be operated with an operator in attendance.
16. Empty the waste basket often for smooth trouble free operation.
17. The shredder should not be tilted more than 10 degrees while the shredder is
in operation.
1. To power the unit, turn the Master Control 
 Switch to the "ON" position. This is located 
 on the side of the unit. Then press the On/Off
 button to the "ON" position to begin 
 shredding.
 
