Tiger RBF-19C - Manual (Page 88)

Maintenance Section 5-6
MAINTENANCE
RBF-19C 07/04
© 2004 Alamo Group Inc.
PROPER TORQUE FOR FASTENERS (FIGURE 5-3)
The chart lists the correct tightening torque for fasteners. When bolts are to be tightened or replaced, refer to this
chart to determine the grade of bolts and the proper torque except when specific torque values are assigned in
manual text.
NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil.
They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used.
This applies to both UNF fine and UNC coarse threads.
RECOMMENDED TORQUE IN FOOT POUNDS UNLESS OTHERWISE STATED IN THE MANUAL
*
*
FIGURE 5-3