Topcom Twintalker 6800 - Manual (Page 11)

Topcom Twintalker 6800 11
Topcom Twintalker 6800
ENGLIS
H
13.8 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press and simultaneous to activate channel monitoring. Hold these buttons for 3
seconds for contiuous monitoring.
• Press to stop monitoring
13.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.
• Press 3 times.
• Press to turn the VOX feature ON and press again to select the
VOX sensitivity level which is indicated in the right corner of the display.
Press
until OF appears on the display, to turn VOX OFF.
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press
.
13.10 Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to
8.
• Press and hold . Press briefly to start scanning.
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN
pauses and you will hear the active signal.
• Press to communicate through the active signal channel. Press to
deactivate channel scan.
When an active signal (one of 8 channels) is detected, press or to bypass the current
channel and continue to search for another active channel
13.11 Call Tones
A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
4 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call tones.
• Press to confirm your selection and return to the standby mode.
PTT
PTT
PTT
PTT