Channel scan memory (adding channels), Menu option, Helpful hints (problems/solutions) – Technicolor - Thomson DP50747 User Manual
Page 38
![background image](/manuals/216483/38/background.png)
38
MENU OPTION—
CHANNEL SCAN MEMORY
Cannot select or scan some
channels.
●
Channels may be removed from
memory.
●
Check antenna connections.
●
NO digital signal being broadcast.
●
Weak Signal.
●
V-Guide is set to block program-
ming.
●
Select Channel Scan memory and
manually add channels or start an
“All Channel Search.”
●
Turn antenna, install signal
booster.
●
Set V-Guide to “Off” or press
RESET key to clear all settings and
restart channel search.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
CHECK THESE CONDITIONS
TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
3
Use the CHANNEL (CH
▲▼) keys or numerical
0 ~ 9 keys to select desired channel.
4
Press the ENTER key to add the channel. The
display will change to “added.”
1
Press the MENU key to display the Main menu.
2
Use the CURSOR
▲▼ keys to highlight Channel
Scan Memory. Press ENTER.
ADDING DIGITAL OR ANALOG
CHANNELS TO MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH
▲
(up) CH
▼ (down) keys. This list can be customized by
deleting and/or adding channels.
After 3 seconds the TV screen will display
“Delete?”
OPERATING TIP:
■
If one digital sub-channel is added back to the
Channel Scan Memory list, all of that channel’s
sub-channels will be added back.