Topcom Twintalker 1300 - Manual (Page 9)

TOPCOM TWINTALKER 1300 9
TOPCOM TWINTALKER 1300
ENGLISH
13 TECHNICAL SPECIFICATIONS
14 WARRANTY
14.1 WARRANTY PERIOD
Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased.
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of a copy of the original purchase receipt, on which the date of purchase
and the unit-model are indicated.
14.2 WARRANTY HANDLING
A faulty unit needs to be returned to an authorized service centre including a valid purchase note. If the unit develops
a fault during the warranty period, the service centre will repair any defects caused by material or manufacturing faults
free of charge.
The service centre will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or
parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit
is exchanged or repaired by the appointed service centres.
14.3 WARRANTY EXCLUSIONS
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or
accessories are not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage
caused during transportation.
No warranty can be claimed if the serial number on the unit has been changed, removed or rendered illegal.
Channels
Frequency
Range
Batteries PMR
Transmission Power
Modulation Type
Channel spacing
8
446.00625MHz - 446.09375 MHz
Up to 3 Km (Open field)
3 x AAA Alkaline or NiMh rechargeable
=< 500mW ERP
FM - F3E
12,5 Khz
The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.
HL_TT_1300_all.book Page 9 Wednesday, August 25, 2004 10:53 AM