Tannoy Di5a - Manual (Page 2)

Frequency Response (-3dB) (1) 100Hz - 25kHz
Frequency Range (-10dB) (1) 90Hz - 30kHz
Dispersion (-6dB) 90 degrees conical
Driver Complement
Low Frequency 1x 110mm (4.50")
Mineral loaded polypropylene
High Frequency 25mm (1.00") ICT TM
Crossover 7kHz
Inductively Coupled ICT TM
Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz
Directivity Index (DI) 6.6 averaged 1kHz to 10kHz
Rated Maximum SPL (2)
Average 103dB
Peak 109dB
Power Output 30W RMS
Distortion
10% Full Power (4.25V) 2nd Harmonic 3rd Harmonic
250Hz 1.33% 0.25%
1kHz 0.62% 0.16%
10kHz 1.43% 0.35%
1% Full Power (1.34V) 2nd Harmonic 3rd Harmonic
250Hz 0.41% 0.10%
1kHz 0.23% 0.07%
10kHz 0.32% 0.18%
Input Sensitivity 775mV (balanced)
(for maxium input) 500mV (unbalanced)
Input Independance 11kOhms (balanced)
7k Ohms (unbalanced)
Protection Circultry Thermal
Soft Limiting
Supply 100 - 240V AC, 50 - 60Hz
Fuse T1AL 250V
Power Consumption 76VA maximum
Di5a
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
TECHNICAL SPECIFICATIONS
System Di5a Construction
Enclosure High impact Polystyrene (HIPS)
Grille Steel, with weather resistant coating
Finish Textured black or white paint with matching rubber
trims, Factory fitted custom trim colours available to
special order
Connectors 6 way euro-type input / output connector
Unbalanced RCA (phono) input
Mains inlet IEC type C13
Fittings 2 x M8 yoke bracket inserts
Supplied Yoke bracket
Accessories
Optional Pole mount adaptor
Accessories
Dimensions 240.7 x 155.0 x 162.0mm (H x W x D)
9.47 x 6.10 x 6.38" (H x W x D)
NET Weight 2.40kg (5.3lbs)
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, and Ease™ Data can be
downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
8001 4030 Di5a (110V) Black 2
8001 4031 Di5a (230V UK & EU) Black 2
8001 4032 Di5a (110V) White 2
8001 4033 Di5a (230V UK & EU) White 2
PART NUMBER PACKED QUANTITY COLOUR MODEL NAME
Ordering Information
Tannoy adopts a policy of continuous improvement and product specification is subject to change