Telex 80 - Manual (Page 6)

4
IP-223 to Kenwood Radios
2.4 IP223 Configuration:
Setup the desired IP223 line for Kenwood radio control at the following screen:
2.4.1 Per-line setup screen
Choose radio model in the Serial Port Mode box (A).
Change Serial Port Parameter box to 9600.N.8.2 (B).
Configure Talk Group and CHAN fields for channel change capability (C ).
2.4.2 IP223 Jumper settings
Line 1 Jumper setting Line 2
J33, J34 “B”=4-wire J5, J6
J16, J21 “A”=Single ended J19, J20
J14 “A”= 600 J24
J3, J9, J11 “A”=Single ended J25, J28, J29
J13 “B” High J27
J17, J22 “B”= 600 ohms J10, J15
A
B
C