Technicolor - Thomson Ferguson FV 400 L - Manual (Page 3)

2
Some information before you start
Mains connection
This video is suitable for use on A.C. mains supply, 220-240 V - 50 Hz only.
It must not be connected to D.C. mains.
Note: The mains lead of the video is fitted with a moulded plug. If the mains sockets are not
compatible or if for any reason the plug is removed please follow the directions below.
The moulded plug cannot be rewired and if removed must be disposed of safely.
Do NOT under any circumstances plug the severed plug into any mains socket as this could
result in an electric shock.
! The OFF button B B on the remote control does not completely disconnect the unit from the
mains supply but switches operating power on and off.
Important!
If the plug is removed rewire new plug as follows: The wires in the
mains plug are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
BLUE wire to the terminal coded N (Neutral) or coloured black.
BROWN wire to the terminal coded L (Live) or coloured red.
Do NOT make any connection to the terminal in the plug which
is marked by the letter E or by the safety symbol l or coloured
green and yellow.
A fused plug must be fitted with a 3A fuse approved
by ASTA or BSI to BS 1362 and fuse covers must always be
securely replaced.
If your Video Recorder does not work, the fuse may be blown.
BLUE BROWN
N
E
L 3A
3A
3A
R8323UR/GB/MR-BEI/910 8/10/99 17:11 Page 2