Transition Networks E-MUX-SA05 - Manual (Page 2)

Features of the Quad Fan Out:
* External Configuration Switch
* Optional Slide In Cards for AUI, Coax, Twisted Pair and Fiber-optic
interfaces
* Easy to read LED indicators: Transmit, Receive, Jabber, Collision
and Power
* A two year warranty
* Made in the U.S.A
* UL listed, FCC class A compliant
External Switch Settings:
1) Loopback and SQE: Setting 1 when enabled is used for connecting
workstations using the AUI ports, (No optional slide in card can be
installed).
2) Loopback and No SQE: Setting 2 when enabled is used for connect-
ing hubs or repeaters using the AUI ports, (No optional slide in card can
be installed).
3) No Loopback and No SQE: Setting 3 when enabled for Optional
slide in card. Loopback provided by slide in card, the SQE enabled /
disabled is selectable on the card (switch located on the top of the card).
Using the Quad Fan Out:
The Quad AUI Fan Out can be used to connect 4 workstations, hubs or
fan outs together. This provides a cost effective solution that reduces the
number of transceivers and allows greater flexibility in your network
with the optional slide in interface cards. The Quad Fan Out is not a
repeater and will not extend the distance between segments. The Quad
Fan Out must be used with IEEE approved AUI cables.
Optional Slide in cards:
* Fiber-optic interface, P/N E-FRL-SIC
* Coax interface, P/N E-CX-SIC
* Twisted Pair interface, P/N E-TBT-SIC
The Quad Fan Out Specifications:
Enclosure size: 6.25 inches X 5 inches X 1.3 inches
AUI Connections: IEEE 802 Ethernet cable, 50 meters max
Optional Coax interface: RG-58 - 50 ohm coaxial cable
(610 feet maximum distance)
Optional Twisted Pair interface: Level 4, 2 pair twisted, 330 feet
maximum
Optional Fiber-optic interface: ST connectors, 6,600 maximum distance
Environment: 0-70° C, 5% - 90% humidity non-condensing, 0-10,000
foot altitude
Warranty: 2 year limited warranty
Monitoring The Quad Fan Out LED’s:
Transmit (TX): Flashing or lit LED indicates a packet has been
transmitted
Receive (RX): Flashing or lit LED indicated a packet has been received
Features of the Quad Fan Out:
* External Configuration Switch
* Optional Slide In Cards for AUI, Coax, Twisted Pair and Fiber-optic
interfaces
* Easy to read LED indicators: Transmit, Receive, Jabber, Collision
and Power
* A two year warranty
* Made in the U.S.A
* UL listed, FCC class A compliant
External Switch Settings:
repeater and will not extend the distance between segments. The Quad
Fan Out must be used with IEEE approved AUI cables.
Optional Slide in cards:
* Fiber-optic interface, P/N E-FRL-SIC
* Coax interface, P/N E-CX-SIC
* Twisted Pair interface, P/N E-TBT-SIC
The Quad Fan Out Specifications:
Enclosure size: 6.25 inches X 5 inches X 1.3 inches
AUI Connections: IEEE 802 Ethernet cable, 50 meters max