Top Innovations SP-403 - Manual (Page 13)

START TO SEW—TABLE-TOP OPERATION
x Insert four AA batteries or plug in bonus
AC adapter.
x Open dust cover.
x Raise needle to its highest position by
turning the hand wheel counterclockwise.
x Insert stabilizer when sewing heavier
fabrics.
x Move presser foot lift lever up to raise
presser foot.
x Place fabric under the presser foot.
x Draw both the needle thread (top) and
the bobbin thread (bottom) 2-3 in. to the
right.
x Move presser foot lift lever down to
lower presser foot.
x Plug foot pedal into back of unit.
x To begin sewing, slowly step on pedal.
x Hold onto both fabric ends while sewing
x At end of seam, move presser foot
lever up to raise the presser foot.
x Pull threads 2-3 in. forward, then cut.
12