Toshiba CS6910CL User Manual
Page 11
CCD color camera CS6910CL Specification (Rev.A)
The contents described in this document may be changed without prior notice.
9
D4134419A
(2) Memory call setting
You can set setting value save memory numbers, which are called when the power is turned on.
This camera has 8 memory tables in all.
SW3
SW4
SW5
Memory number
OFF
OFF
OFF
0
ON
OFF
OFF
1
OFF
ON
OFF
2
ON
ON
OFF
3
OFF
OFF
ON
4
ON
OFF
ON
5
OFF
ON
ON
6
ON
ON
ON
7
(3) Video output mode setting
You can set the video output mode (analog output/CAMERA LINK output) upon power on.
If this is set to analog output, the camera starts up with the NTSC mode- AE, AWB operation.
The switch setting specifies the initial operation upon power on. After the power is turned on,
you can change the output mode during operation using command control via CAMERA LINK.
SW6
Video output mode
OFF
CAMERA LINK output
ON
Analog output