beautypg.com

Operating sequence, Load the laundry, Measure out the detergent and the fabric softener – Tricity Bendix TBWD 1210 User Manual

Page 11: Switch the machine on, Select the required programme, Washing only

background image

11

Operating Sequence

Washing only

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment of the
detergent drawer in order to activate the ECO valve and
then run a cotton cycle at 95°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment

of the dispenser drawer and start the

machine.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

and the fabric softener

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you have selected the Prewash option or the Soak
programme, pour detergent into the compartment
marked .
If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer). Close the drawer gently.

P0005

P0006

P0004

Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.

3. Switch the machine on

To switch the machine on, press the On/Off button: the
mains-on light comes on. The display will show three
flashing dashes or a blinking zero.

If the programme selector dial is on the Reset Off
position, three flashing dashes will be displayed. If the
programme selector dial is positioned on a wash
programme, a flashing zero appears on the display.

4. Select the required programme

Turn the programme selector dial to the desired
position: the lights corresponding to the different phases
making up the selected programme light on.

The display shows the duration of the programme.

If your laundry needs a

soak time, turn the
programme selector dial to
Soak 30” and then,
before starting a washing
cycle, empty the water as
described in the “Soak
30
° paragraph.

2.05

Prewash

Wash

Rinse
Rinse hold
Drain
Spin
Drying
End

Programme

Drain

Off

Dry

Rinses

Spin

Wool

Cottons

Synthetics

Soak 30

40°

60°

40°

30°

30°

95°

60°

E60°

E40°

30°

E60°

40°

Dry

Softener

Mini 30

30°

40°

Delicates

---

0

On/Off