Tricity Bendix SPLASHBACK SB416 - Manual (Page 19)

19
BEFORE CLEANING THE APPLIANCE,
ALWAYS ALLOW APPLIANCE TO COOL
DOWN BEFORE SWITCHING OFF AT
THE ELECTRICITY SUPPLY.
CLEANING MATERIALS
Before using any cleaning materials on your
appliance, check that they are suitable and that their
use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives
should also be avoided.
CLEANING THE HANDLES
It is strongly recommended that only hot soapy water
is used for cleaning the handles.
CLEANING THE OUTSIDE OF THE
APPLIANCE
DO NOT use abrasive cleaning materials, or
scourers on the outside of the appliance as some of
the finishes are painted and damage may occur.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Regularly wipe
over the control panel, splashback, doors and
appliance sides using a soft cloth and liquid
detergent cleaning materials.
DO NOT ATTEMPT TO REMOVE ANY OF
THE CONTROL KNOBS FROM THE
APPLIANCE AS THIS MAY CAUSE
DAMAGE AND IS A SAFETY HAZARD.
CLEANING THE RADIANT HOB AND
HOTPLATE TRIMS
Clean the hob surface with liquid detergent or a mild
abrasive cream cleaner.
The chrome hotplate trims are removable for easy
cleaning, and can be washed in the dishwasher. The
chrome hotplate supports should NOT be removed.
The spillage tray below the hotplates can be cleaned
using a soap impregnated steel wool pad.
For convenience, the hob is hinged and can be
supported using the hob stay rod during cleaning.
CLEANING THE GRILL AND OVEN
FURNITURE
All removable parts, except the Stayclean oven
panels and grill pan handle can be washed in the
dishwasher.
The grill pan, grill pan grid and oven shelves may be
cleaned using a soap impregnated steel wool pad.
Soaking first in hot soapy water will make cleaning
easier.
CLEANING INSIDE THE GRILL/OVEN
COMPARTMENTS
The vitreous enamel in the grill compartment and on
the oven base can be cleaned using normal oven
cleaners or aerosol oven cleaners with care.
Ensure that the manufacturers instructions are
followed and that all parts are well rinsed afterwards.
Aerosol cleaners must not be used on Stayclean
surfaces and must not come into contact wit
elements as this may cause damage.
CARE AND CLEANING