Topcom 2511C User Manual

Page 9

11. If the handset does not locate the base, it will return to the standby mode

after a few seconds.
Try again by changing the base number and check that you are not in a
environment where there is interference. Move closer to the base.

4.2 SETTING UP A BUTLER HANDSET ON ANOTHER BASE

If you want to use a Butler 2511C DELUXE handset with a base of another model.
The base must be GAP compatible.
1. To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 10 from the paragraph 4.1.

5. TROUBLE SHOOTING

Symptom

Possible cause

Solution

No display

Batteries uncharged

Check the position of the
batteries
Recharge the batteries

Handset turned OFF

Turn ON the handset

No tone

Telephone cord badly

Check the telephone cord

connected

connection

The line is occupied by

Wait until the other handset

another handset

hangs up

The icon

Handset out of range

Bring the handset closer to the

flashes

base

The base has no power

Check the mains connection to

supply

the base

The handset is not

registered on the base

base

Telephone does not Manipulation error

Remove the batteries and

react to pressing

but them back in place

the keys

ENGLISH

Topcom Butler 2511C DELUXE

HANDL. B2511_C.qxd 31-10-2003 10:45 Page 9