Topaz Systems AM1 - Manual (Page 7)

AM1
AM5
7
ENGLISH
Technical specifications
AM1
Power output 20 watts (into 8Ω)
THD (unweighted) <0.02% @ 1kHz, 80% of rated power
<0.15% 20Hz – 20kHz, 80% of rated power
<0.1% 20Hz – 20kHz @ 10W
Frequency response (-3dB) 10Hz - 30kHz
S/N ratio (ref 1W) >82dB (unweighted)
Input impedances 32k ohms
Power Amp damping factor >100
Max. power consumption 150W
Dimensions 80 x 430 x 340mm
(3.1 x 16.9 x 13.4”)
Weight 5.1kg (11.2lbs)
AM5
Power output 25 watts (into 8Ω)
THD (unweighted) <0.015% @ 1kHz, 80% of rated power
<0.15% 20Hz – 20kHz, 80% of rated power
<0.1% 20Hz – 20kHz @ 10W
Frequency response (-3dB) 10Hz - 30kHz
S/N ratio (ref 1W) >82dB (unweighted)
Input impedances 32k ohms
Power Amp damping factor >100
Max. power consumption 180W
Bass/Treble controls Shelving, ultimate boost/cut
+/- 5.5dB @ 20Hz and 20kHz
Dimensions 80 x 430 x 340mm
(3.1x 16.9 x 13.4”)
Weight 5.1kg (11.2lbs)
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
Check the power button is on at the front of the unit.
There is no sound
Check the correct input is selected.
Check that the speakers are connected correctly.
The sound is distorted
Check speaker connections.
There is a hum coming from the speaker
Ensure that all cable connections are secure.
There is unwanted background noise and interference
Move the unit away from other electrical equipment that is likely to cause
interference.
Ensure that all cable connections are secure.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
www.cambridge-audio.com/sts/faqs
For all servicing, in or out of warranty, please contact your dealer.