Tangent DAB-50 - Manual (Page 15)

14
PHON
POWER
DAB-50 DAB/FM TUNER
1
3
3
Turn on the unit by pressing the mains switch.
Press the standby button on the remote control to switch to standby
mode. The display will turn off and all functions will be reduced to a
minimum to make sure that the unit uses minimal power. When in standby
mode the unit only reacts to the standby button of the remote control.
If you wish to turn off the unit to avoid any power consumption, you must
press the mains switch.
Protect the environment and turn off the unit after use.
2 +
2
1
On, Off and standby
OPERATION AND FUNCTIONS
Info and function
2
1
+
1
2
DAB/FM 4 3 2 1 AUTOTUNE INFO
CONTROL/TUNING
PRESS TO SELECT
1 2
As this tuner can receive both normal FM radio
and DAB (Digital Audio Broadcasting), it features
a function that can switch between the two
reception types. To switch between DAB and FM,
you must either press the DAB/FM button on the
front panel or the FUNCTION button on the
remote control.
This tuner features RDS on the FM receiver. DAB
also offers some information possibilities that
resemble RDS as we know it from FM. To activate
this information from both DAB and FM, you must
press the INFO button either on the front panel or
on the remote control. The display will show
information about for instance time and date,
name of station, name of artist, title, etc.
Note:
If the INFO button is pressed after channels have
been saved, the strength of the antenna signal will
also be displayed.