Appendix a: specifications – TP-Link TL-SL1210 User Manual
Page 10
6
Appendix A: Specifications
General
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X (for TL-SL1351 only)
Standards
ANSI/IEEE Std 802.3 Nway
IEEE802.3x
Protocol CSMA/CD
Ethernet: 10Mbps (Half Duplex), 20Mbps (FullDuplex)
Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex)
Data
Transfer
Rate
Gigabit Ethernet: 2000Mbps (Full Duplex)
Topology Star
UTP category 3, 4, 5 cable (maximum 100m)
10Base-T:
EIA/TIA-568 100Ω STP (maximum 100m)
UTP category 5, 5e cable (maximum 100m)
100Base-TX:
EIA/TIA-568 100Ω STP (maximum 100m)
1000Base-T: UTP category 5, 5e cable (maximum 100m)
62.5 u m multi mode fiber (maximum 275m)
1000Base-SX (for
TL-SL3151 only):
50 u m multi mode fiber (maximum 550m)
62.5 u m multi mode fiber (maximum 550m)
50 u m multi mode fiber (maximum 550m)
Network
Media
(Cable)
1000Base-LX (for
TL-SL3151 only):
9 u m/10 u m single mode fiber (maximum
5km)
8/16/24/48 10/100Mbps Auto-Negotiation RJ-45 ports
2/1/2/2 10/100/1000Mbps Auto-Negotiation RJ-45 ports
Number of
Ports
1 SFP module Interface (for TL-SL1351 only)