Toro N-DR2000 - Manual (Page 15)

15
Audio recording: 32 K Compression: OFF Loopback ( * 1)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 46 34 27 19
3 52 40 33 24
5 60 50 44 35
1 52 41 34 25
3 57 47 40 31
5 63 56 50 41
1 60 52 45 36
3 64 57 51 42
5 67 63 59 52
Audio recording: 32 K Compression: ON Loopback ( * 1)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 87 52 37 23
3 110 69 50 32
5 150 104 79 54
1 112 71 51 33
3 136 91 68 45
5 175 129 102 72
1 155 109 83 57
3 178 133 105 75
5 211 173 146 112
Audio recording: 8 K Compression: ON Loopback ( * 1)
Image size Picture quality
Frame rate per camera
1 fps 2 fps 3 fps 5 fps
1 110 59 40 25
3 149 83 57 35
5 233 137 97 61
1 153 85 59 36
3 202 116 82 51
5 298 185 135 87
1 245 146 104 66
3 307 193 141 91
5 421 292 224 152
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
High: D1
High: D1
High: D1
Medium: Half-D1
Medium: Half-D1
Medium: Half-D1
Low: QVGA
Low: QVGA
Low: QVGA
Unit: Hour
Unit: Hour
Unit: Hour
• Depending on recording conditions, actual available recording times may be shorter than those listed in this
chart.
• Using the N-DR2000, it is possible to conduct a variety of recording condition settings for the recorded
content of each individual camera. These conditions may change the available recording time.
• Recording times listed in the table are for reference only.
• Loopback refers to audio input from the device connected to the network camera/video transmitter. The
N-DR2000 can also record audio transmitted from the network camera/video transmitter. Refer to the
settings manual for more information on loopback settings.
( * 1) CU version