Technicolor - Thomson MS4200 - Manual (Page 14)

Loading Discs
1. Press SOURCE repeatedly on the main unit or
CD on the remote control to select CD mode.
2. Press OPEN/CLOSE to open the disc
compartment.
3. Insert up to 5 discs with label face up.
4. Press OPEN/CLOSE
again to close the
disc compartment.
The occupied disc tray icons light and the current
disc number shows on the display.
If the disc is a mp3 CD, the mp3 icon lights on the
display.
Play and Pause Discs
• Press PLAY/PAUSE in stop mode to begin
playback.
• Press PLAY/PAUSE during playback to to
pause disc.Press again to resume.
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the disc tray
while a CD is playing.
2. Load/change discs for available trays.
3. Press OPEN/CLOSE
again to close the
tray.
Stop Playback
During playback, press STOP to stop playback.
10
EN
CD Player
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
Tips:
In completely stop mode for mp3 CDs, press
STOP again to return to the first track of
the current disc. The total number of
tracks on the current disc is displayed (
TT
).
Notes on Simple mp3
Playback:
• This unit is compatible with simple mp3
discs. Text information can not be show
(e.g. ID3 tags, song name, album, artists,
etc.).
• It is strongly recommended that you use
a single folder structure for simple mp3
discs. If there are more than only layer
of folders, the tracks may be rearranged.
(Refer to pg. 17 for simple mp3 playback
sequence)
• The first 100 folders from the first 8
folder levels can be read on this unit.
• The unit reads the first 412 files from
each discs and the first 255 files in each
folder.
MS4200 EN 2/3/04 9:54 AM Page 15