Tricity Bendix BS 621/2 - Manual (Page 23)

THINGS TO NOTE
l The oven neon will glow until the oven has
reached the desired temperature and then go
out. It will cycle ON and OFF periodically during
cooking showing that the temperature is being
maintained.
l
The oven fan will operate continually during
cooking.
l The interior oven light will come on when the
temperature is selected.
l
If an automatic programme is set, the oven fan
and light do not come on until cooking begins.
TO FIT THE OVEN SHELVES
The shelves should be fitted with the straight rods
uppermost on the frame and the forms towards the
back of the oven. If not fitted correctly the anti-tilt and
safety stop mechanism will be affected.
HINTS AND TIPS
l
Arrange the shelves in the required positions
before switching the oven ON. Shelves are
numbered from the bottom upwards.
l
When cooking more than one dish in the fan
oven, place dishes centrally on different shelves
rather than cluster several dishes on one shelf,
this will allow the heat to circulate freely for the
best cooking results.
l When batch baking one type of food, e.g. Victoria
sandwich cakes, those of similar size will be
cooked in the same time.
l
It is recommended that when baking larger
quantities the shelf positions should be evenly
spaced to suit the load being cooked. A slight
increase in cooking time may be necessary.
l
DO NOT place baking trays directly on the oven
floor as it interferes with the oven air circulation
and can lead to base burning; use the lower shelf
position. However, non-critical dishes may be
placed on the oven base when more space is
required.
l
The use of excessively high temperatures
can cause uneven browning. It may be
necessary to reduce temperatures slightly.
Refer to the recommendations given in the
oven cooking chart see page 24.
23
Back of the Oven
Straight Rods
Frame