Technicolor - Thomson DTH211 - Manual (Page 22)

Menus
22
PAL or NTSC TV sets
If the picture on the DVD being played appear in black and white on your TV screen, the standard
of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to
NTSC or vice versa.
Select PAL/NTSC then with the OK key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Front Display menu
Depending on the brightness of the room where you’ve installed your player, select one of the 4
settings to adapt the brightness of the display panel to suit its environment.
1. If a disc is being played, press STOP (the player menu appears).
2. Press to highlight Display and press OK (The Display menu appears giving a choice of
options).
3. Press to highlight Front Display and press OK (The Front Display menu appears giving
a choice of options).
4. Use keys or to highlight one of the four available options and press OK to validate
your choice.
•
Dim for Movies (dimmed lighting during replay of a disc),
• Off for Movies (no display during replay of a disc),
• Always Bright,
• Always Dim.
5. To return to the player menu, press until the menu is displayed on the screen.
Black Level
Depending on the brightness of the room where you’ve installed your player, select one of the 2
settings to adapt the brightness of the screen to its environment.
1. If a disc is being played, press STOP (the player menu appears).
2. Press to highlight Display and press OK (The Display menu appears giving a choice of
options).
3. Press to highlight Black Level and press OK (The Black Level menu appears giving a
choice of options).
4. Use keys or to highlight one of the two available options and press OK to validate
your choice.
5. To return to the player menu, press until the menu is displayed on the screen.
2_DTH211_EN 27/08/03 10:39 Page 22