Sim at services supported by the z600, Z600 – Tannoy Z600 User Manual
Page 43
White Paper
Z600
43
September 2003
SIM AT services supported by the Z600
Service
Mode
Support
CALL CONTROL
Yes
CELL BROADCAST DOWN-
LOAD
Yes
DISPLAY TEXT
Text of up to 240 characters (120 ucs2 coded).
Yes
bit 1:
0 = normal priority
Yes
1 = high priority
Yes
bit 8:
0 = clear message after a delay
Yes
1 = wait for user to clear message
Yes
GET INKEY
General: The GET_INKEY requires that the user
confirms his/her choice
Yes
bit 1:
0 = digits (0-9, *, # and +) only
1 = alphabet set
Yes
Yes
bit 2:
0 = SMS default alphabet
1 = UCS2 alphabet
Yes
Yes
bit 3:
0 = character sets defined by bit 1 and bit 2 are
enabled
1 = character sets defined by bit 1 and bit 2 are
disabled and the Yes/No response is requested
Yes
Yes
GET INPUT
General: No. of hidden input characters
20
bit 1:
0 = digits (0-9, *, # and +) only
1 = alphabet set
Yes
Yes
bit 2:
0 = SMS default alphabet
1 = UCS2 alphabet
Yes
Yes
bit 3:
0 = ME may echo user input on the display
1 = user input not to be revealed in any way (see
note)
Yes
Yes
bit 4:
0 = user input to be in unpacked format
1 = user input to be in SMS packed format
Yes
Yes
bit 8:
0 = no help information available
1 = help information available
Yes
No