Toshiba IK-HD1D - Manual (Page 33)

33
Power supply 12V DC㫧10%
Power consumption Approx. 10.3 W (including a camera head)
Pick-up system RGB, 3CCD, Micro prism system
Image sensor 1/3 inch, IT䋭CCD
Output pixels Horizontal : 1920, Vertical : 1080
Scanning system 2䋺1 interlace
Scan frequency [59.94 Hz setting] Horizontal : 33.716 kHz, Vertical : 59.94 Hz
[50 Hz setting] Horizontal : 28.125 kHz, Vertical : 50 Hz
[59.94 Hz setting] Horizontal : 33.716 kHz 㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[50 Hz setting] Horizontal : 28.125 kHz 㫧35 ppm, Vertical : 50 Hz 㫧35 ppm
[59.94 Hz setting] Horizontal : 33.716 kHz 㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[50 Hz setting] Horizontal : 28.125 kHz 㫧35 ppm, Vertical : 50 Hz 㫧35 ppm
Sync system Internal/External (Automatic switching)
Horizontal resolution 800TV lines standard
Vertical resolution 800TV lines standard
Sensitivity F6.8䋨59.94 Hz setting, 2000 lx, 3000 K䋩, F7.4䋨50 Hz setting, 2000 lx, 3000 K䋩
Minimum illumination 13 lx䋨59.94 Hz setting, F2.2, sensitivity䋫18 dB䋩,
11 lx䋨50 Hz setting, F2.2, sensitivity䋫18 dB䋩
SN ratio 56 dB standard (gain 0 dB, DNR OFF)
Ambient temperature (32㫦 㫦 F) to 40 0 F to 104 㷄 㷄
Ambient humidity Less than 90%
Weight Approx. 725 g (1.60 lbs)
External dimension
(4.33”(W)㬍1.57”(H)㬍7.32”(D)) (excluding protrusions)
110(W)㬍40(H)㬍186(D) mm
Scene file(user memories) 5 files (A, B, C, D, E)
White balance ATW䋨Automatic tracing balance䋩, AWB䋨Automatic white balance䋩
MANUAL䋨Manual䋩
Gain AUTO䋨Automatic gain control䋩, MANUAL䋨Manual䋩, OFF䋨0 dB䋩
Output signal or RGB : 0.7 V (p-p) standard 75 Y/P
B
/P
R
㱅 unbalanced, BNC connector
DVI-D (digital RGB) : DVI-D terminal
Sync signal output SYNC : 75 㱅 unbalanced BNC connector 0.6 V 0.1 V
Interface Serial data interface䋨RS-232C䋩
Optional parts IK-HD1H (3CCD HD Camera Head)
EXC䋭HD03 (Approx. 3 m (118”) Camera cable)
EXC䋭HD06 (Approx. 6 m (236”) Camera cable)
EXC䋭HD10 (Approx. 10 m (394”) Camera cable)
EXC䋭HD30 (Approx. 30 m (1181”) Camera cable)
AC-Y415A (12V DC Power Supply)
Design and specifications are subject to change without notice.
* These conditions are only satisfied when the camera control unit is connected to camera head model # IK-HD1H.
External sync input HD SYNC 0.6 V (p-p) 75 㱅 unbalanced BNC connector
9. SPECIFICATIONS
㫧