Toshiba DP125F User Manual
Page 12
12
• Collect the .DEV file from the main ImageVision2000/SmartLink2000 program files folder
named after your device.
• Collect a Function List printed by the Toshiba MFP
Send all the above to
for review.
Check can read setup data from Toshiba MFP into Network
Viewer/SmartLink2000
1. Start Network Viewer, ImageVision2000 or SmartLink2000.
2. If Welcome is visible, click “Browse Folders” to open the main display.
3. In the left-hand folder tree, select “Devices” to open the Devices folder.
4. Right click the appropriate device name and if present select “Launch fax” from the menu – if this
menu is not present this means the device driver is already running and you may continue with the
next step.
5. Right click the appropriate device name and select “Device settings” – Network
Viewer/ImageVision2000/SmartLink2000 should start to read setup data from the Toshiba MFP.
6. If all is well a Device Settings screen similar to the one shown below should appear: