Tappan 316000191 - Manual (Page 14)

14
When lowering the top,
grasp the sides with fingertips only. Be
careful not to pinch fingers. Also, DO
NOT drop or bend the rangetop when
raising or lowering. This could damage
the surface.
General Cleaning
(continued)
DO NOT turn the
burners on when the cooktop is raised
for cleaning. Be sure that the top is
completely lowered and securely in
place before turning on the burners.
To Raise and Lower the Top for Cleaning
1. Remove burner grates and spillover bowls. Set aside.
2. Grasp the sides of the cooktop and then lift from the front.
3. Lift the top high enough to allow the support rods to snap into place. The
Lift-up rods will support the top in its raised position.
4. Clean underneath using hot, soapy water and a clean cloth; then, dry.
5. Lower the top gently by pushing back on each rod. This will release the
notched support. Hold the range top and slide the range top down into the
range frame.
To Remove and Replace Burners for Cleaning
To Remove Burners
1. Remove shipping screws with a Phillips® Head screwdriver. See illustration
for screw locations.
2. Lift burner up and out of range.
To Replace Burners
1. Place burner pair over mounting bracket. Make sure burners are positioned
over gas valves and are properly positioned and level.
2. Replace shipping screws if desired.