Turbosound LMS-A6 - Manual (Page 6)

user manual
LMS-A6
LMS-A6 user manual
Page 6
FRONT PANEL FUNCTIONS
1. Mono Band 1 Mono Band 1 Mono Band 1 Mono Band 1 – sums the Left and Right Band signals together (up position) and feeds them in
mono to both Band 1 outputs.
2. Limiter cancel Limiter cancel Limiter cancel Limiter cancel – disables all limiter functions and causes the LIMITER CANCEL LED to light.
3. Power Standby switch Power Standby switch Power Standby switch Power Standby switch – determines the power-up mode: in the up (cancel) position the unit
automatically switches out of mute after six seconds; in the down position the unit remains in
standby mode with all outputs muted.
4. Remote Standby cancel Remote Standby cancel Remote Standby cancel Remote Standby cancel – enables (down position) or disables (up position) the REMOTE
STANDBY function. Inoperable if the remote stanby function has not been wired up.
5. Phase adjustment Phase adjustment Phase adjustment Phase adjustment – variable adjustment between 0 ° and 180°.
6. Gain trim Gain trim Gain trim Gain trim – allows the band 1 gains and band 3 gains to be adjusted to match band 2 where
speaker/amplifier sensititvities vary for each band.
7. Polarity Polarity Polarity Polarity – reverses the polarity of the selected frequency band.
8. Mute LED Mute LED Mute LED Mute LED – indicates mute staus of the selected channel.
9. Mute key Mute key Mute key Mute key – one latching mute switch per output channel. Press to mute; press again to un-
mute.
10. Output meters Output meters Output meters Output meters – LED ladder displays headroom before limiting occurs. The lower four green
LEDs indicate –24dB, -12dB, -6dB and –1dB respectively, with the orange ‘LIM’ LED set at the
limiter threshold for that channel. The top, red LED indicates 4dB of limiting.
11. Power Power Power Power – green LED indicates that power is applied to the unit.
12. Standy Mute Standy Mute Standy Mute Standy Mute – red LED indicates when the standby mute mode is set.
13. Limiter Cancel Limiter Cancel Limiter Cancel Limiter Cancel – indicates when the limiter cancel mode is set.
1
2 4 5 7 8 11 12
3 6 9 10
POL
13