DVico TVIX PVR R-2230 - Manual (Page 15)

Ultimate PVR with HD Digital Jukebox
15
3.4 Connecting the USB HOST
The TViX also provides USB-host ports with USB 2.0 compliant host/ function processor.
USB-host allows communication between two USB devices.
You can connect any external storage device (e.g. memory
stick) or an external hard disk and play files stored on these
external devices. You can even connect your Digital Camera
directly to play digital images and pictures without any other
devices.
After connecting the client device, press the left-arrow button
on your remote controller and then navigate to the desired
storage unit. You can thereby change the location from
internal hard disk to external USB device and back.
3.5 Connecting the Antenna
Before connecting the Antenna or r.f. cable, the power of TViX should be turned off.
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install
properly.
We recommend using a threaded-type antenna connector. Move clockwise to tighten.
If signal strength meter indicates less than the middle of the scale, adjust your antenna to increase the
signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
◈
TViX PVR R-2200 – Analog TV tuner + A/V IN
◈
TViX PVR R-2210 – NTSC Analog TV & ATSC Digital TV + A/V IN.
◈
TViX PVR R-2230 – DVB-T Digital TV + A/V IN
** Connect the included power adapter to the jack labeled DC-IN on the back of the TViX. Then
plug the other end of the power adapter into an available wall socket. Make sure that your TV is
switched to the AV input to which the TViX is connected (on the back of the TV).