Topcom BUTLER 920 - Manual (Page 18)

16
Caller-ID function (CLIP)
* Only when the network sends the time/date together with the telephone
number! On some networks with Caller ID, time and date will not be
displayed.
7.3 Calling a number from the call list
7.4 Erasing a number from the call list
7.5 Storing a number from the call list into the memory
2 Press the right key to skip the date and time.
3 Press the left key to scroll to the previous call, press the
right key to show the next call.
4 Leave the call list by pressing the mute key.
1 Press the call log key.
2 Scroll through the call list until the desired telephone
number is displayed.
3 Press the line key to start the call.
The number will be dialled automatically.
4 Press the line key again when you want to terminate the
call.
1 Press the call log key.
2 Scroll through the call list until the desired telephone
number is displayed.
3 Press and hold the mute key for 3 seconds to erase the
number.
1 Press the call log key.
2 Scroll through the call list until the desired telephone
number is displayed.
3 Press and hold the memory key for 3 seconds.
4 Enter the memory location (0-9) where you want to
store the number.
5 Enter the memory key again to confirm.
4 5 6
g h i j k l m n o