4 connecting a computer using the ethernet cable, Requirements, Ethernet cable – Technicolor - Thomson TG585 V8 User Manual
Page 18: Procedure, Connecting a computer using the ethernet cable, Gateway, see
E-DOC-CTC-20090708-0001 v1.0
12
1
Installation
1.4
Connecting a Computer Using the Ethernet Cable
Requirements
Both your computer and Thomson Gateway must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1
Connect one end of the Ethernet cable to one of the
yellow
Ethernet ports of your Thomson Gateway:
2
Connect the other end of the Ethernet cable to your computer.
3
Your computer is now connected to your network. No additional configuration is needed.