Tripp Lite HT810ISOCTR - Manual (Page 2)

1U rackmount or console installation options; rackmount hardware and removable rubber console feet included
Lighted power strip with integrated 15A circuit breaker offers power control and overload protection
Fail-safe thermal fusing acts like an additional circuit breaker, shutting down the unit and connected equipment in the event of a catastrophic
surge
Color-coordinated outlet/plug labels match outlets to component power cords for easy identification
Audible alarm immediately alerts user to damaged protection circuitry; perfect for installations where LEDs aren't normally viewed
TUV tested to UL standards 1449, 60950 and 962A
Specifications
OVERVIEW
Intended Application Audio/Video
OUTPUT
Frequency compatibility 50 / 60 Hz
Output watts 1440
Circuit Breaker (amps) 12
Overload protection 15A circuit breaker
Outlet quantity / type 8 NEMA 5-15R (1 front/7 rear)
INPUT
Nominal Input Voltage(s)
Supported 120V AC
Recommended Electrical
Service 120V (110-125V)
Input connection type NEMA 5-15P
Input plug features Right-angle plug
Input cord length (ft.) 10
Input cord length (m) 3
Input cord gauge, type 14 gauge, SJT
Voltage compatibility (VAC) 120
Maximum Surge Amps 225000
LEDS ALARMS & SWITCHES
Alarms Audible alarm
Switches Combination AC circuit breaker and 2 position red illuminated on/off power switch
Diagnostic LEDs Input Voltage LCD meter displays "current usage" with dimmer control. Alerts user to input voltage levels
SURGE / NOISE SUPPRESSION
AC suppression joule rating 5700
AC suppression response
time NM = instantaneous CM = < 1 ns
Protection modes Includes full normal mode (H-N) and common mode (N-G/H-G) line surge suppression
Safe thermal fusing Yes
UL1449 let through rating 330V - UL verified