Technika TESKO SP-229I - Manual (Page 8)

6
iPod ADAPTORS SELECTING AN ADAPTOR
Before docking your iPod you must first check if your iPod
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPod as shown below. LIST OF SUPPLIED ADAPTORS
1) iPod video (60GB & 80GB), iPod classic (160GB).
1# iPod nano (3rd Gen).
1$ iPod touch (1st Gen, 8GB & 16GB).
Other iPod models with dock connectors
Your iPod may have been supplied, packed with a standard
dock adaptor. If so, this can be used as the docking bay on
your unit is compatible with adaptors supplied by Apple.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
you can buy one from Apple on-line. To determine the exact
model of your iPod, refer to this web-link - http://support.
apple.com/kb/HT1353. You can then browse the iPod
accessories page on the Apple website to find an adaptor for
your iPod model that can be purchased on-line.
Once you have located the correct adaptor for your iPod, press
it gently into the iPod Docking Bay before attempting to dock
your iPod.
If you own an iPod Shuffle, a model without dock connector
or prefer to connect your iPod by cable, you can connect the
sound output to the Audio Input jack on the rear panel.
FINDING THE CORRECT iPod ADAPTOR
Your iPod docking system is supplied with a selection of
docking adaptors that are compatible with several models
in the iPod range. Refer to the table of iPod models in the
next column which lists the adaptor numbers (marked
underneath the adaptor), compatibility and instructions for
obtaining an adaptor for unlisted models.
NOTE: Do not dock an iPod without fitting the correct adaptor,
you may damage the iPod and your unit.
CONNECTING OTHER iPod
MODELS (INC SHUFFLE)
Using the 3.5mm stereo jack to jack cable (supplied, •
with grey plugs), connect one end of the cable to the
headphone socket of the iPod, and the other end to the
Audio Input jack on the back panel.
To listen to your iPod, follow the instructions under
•
‘External Sources’ on page 8 for playing equipment
connected to the Audio Input jack.
NOTE:- The volume control of the iPod must be turned up
when playing through the Audio Input jack.
NOTE:- An iPod connected to the Audio Input jack cannot be
operated from the remote control.
Headphone socket
To the Audio
Input jack
Docking Connector
iPod adaptor
Docking bay
Before docking your iPod, you must first fit the correct iPod
adaptor to the docking bay. Each iPod adaptor matches the
shape of a particular iPod and is necessary to ensure that
your iPod is securely held when docked.