Teac PortaDVD User Manual
Page 19
TEAC PortaDVD User’s Manual
13
Figure 13. Add New Hardware Wizard
6.
Click the
Next
button.
The system displays the following
Add New Hardware Wizard
panel,
indicating that installation is complete:
Figure 14. Add New Hardware Wizard
7.
Click the
Finish
button.
The system displays the following panel:
Figure 15. System Settings Change
8.
Click the
Yes
button to shut down the computer.
The system shuts down the computer.
9.
Remove the floppy diskette and restart the computer.
After you restart the computer, the system will assign a new drive
letter and icon to the PortaDVD drive.
10. To fully utilize the drive, you should now install DVDExpress
PortaDVD.book Page 13 Saturday, February 17, 2001 7:25 PM