Tripp Lite PDUMH15AT - Manual (Page 2)

Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds
are fully supported
On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or
of lower quality than the primary source
Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds
Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
Outlets are factory programmed for sequential turn-on at 250 milliscond intervals when the PDU is first energized to prevent inrush-related
equipment interaction on startup
Front panel LEDs confirm power availability on both input lines
Specifications
OVERVIEW
PDU Type Auto-Transfer Switch; Metered
OUTPUT
Frequency
compatibility 60 Hz
Output VA 1800
Output nominal
voltage 120V
Outlet quantity / type 8 NEMA 5-15R
Outlet Type NEMA 5-15R
INPUT
Nominal Input
Voltage(s) Supported 120V AC
PDU Input Voltage 100; 120; 127
Maximum Input Amps
(A) 15
Maximum Input Amps
(A) Details 15A maximum (Agency de-rated to 12A continuous)
PDU Plug Type NEMA 5-15P
Input cord length (ft.) 12
Input cord length (m) 3.66
Voltage compatibility
(VAC) 120
Phase Single-Phase
LEDS ALARMS & SWITCHES
Front panel LEDs 10 front panel LEDs display power on - off status for each outlet, plus 3 LEDs for power status on each input line
cord. Digital Current Meter displays output power consumption in amps.
PHYSICAL
Shipping Dimensions
(HWD/in) 6.25 x 22.5 x 23.5
Shipping Dimensions
(HWD/cm) 15.9 x 57.2 x 59.7
Shipping weight (lbs) 15.2
Shipping weight (kg) 6.9