Tascam T-3000 - Manual (Page 2)

T-3000 Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascam.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information. Page 2 of 2
T-3000_TECHDOC.pdf
032500
FRONT AND BACK PANEL
ARCHITECT'S SPECIFICATIONS
The cassette duplicator shall be a three bay duplicator that
can mount in a standard 19" rack mount form. Dimensions
shall be 19" x 6" x 13.2" (W x H x D), taking up three
standard height rack spaces.
Metric measurements: 482x152x335mm
The cassette duplicator shall record to normal or CrO2 tape
formulations, copying all 4 tracks of audio on cassette
simultaneously at a tape speed of 7.5ips (19cm/sec).
Each mechanism in the duplicator shall have a separate
direct drive motor on the capstan for stability. Frequency
response shall be maintained from 50Hz to 10kHz, ±3dB.
The cassette duplicator shall support cascading of up to ten
like duplicators for a 1 to 29 duplication chain. Cascade ports
and transport logic shall be provided on the back panel for
this dedicated function. When the duplicator is chained in
cascade mode, the master well of the duplicator shall be
switchable to be a recording well for maximum flexibility.
The cassette duplicator shall be a TASCAM T-3000.
NOTE: This text is available in a standard text file on TASCAM's
Sound contractor CD-ROM. Contact TASCAM for details.