Toshiba BDX2000KU - Manual (Page 27)

27 EN
PLAYBACK
• For MP3, WMA or JPEG files, use [
K / L] to select a
folder, then press [ENTER] first, and then use [
K / L]
to select a file, then press [ENTER].
• Press [CLEAR] to erase the last file of the program.
• Use [
K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [
s / B] to go back / forward between the
hierarchy of folders.
3 Press [PLAY
B] to start program playback.
• The program playback will start.
To exit from the program playback mode:
• Press [RETURN] in stop mode.
This function shuffles the playback order of tracks / files.
1 In stop mode, press [MODE] twice.
2 Press [PLAY
B] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
Operation Guide: Press [RED] to go to the previous
page in the track / folder / file list
Press [GREEN] to go to the next
page in the track / folder / file list
Press [BLUE] to go to the
previous page in the
programmed list
Press [YELLOW] to go to the next
page in the programmed list
Note
• During program playback, press [STOP
C] once to
set the resume point, and then press [PLAY
B] to
resume program playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP
C] was pressed (MP3 / WMA / JPEG).
• During program playback, press [STOP
C] twice to
display the program screen. To go back to the
normal program playback, press [RETURN] to exit
from the program screen, then press [PLAY
B].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until “
All”
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media is switched.
- the disc / card is removed (as for “Disc” mode, just
opening the disc tray will clear the program info).
8
0 : 26 : 24
CD-DA
2 / 16 0 : 01 : 05
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
Program Total
Page Down
Random Playback
audio CD
MP3 / WMA /
JPEG :
: Track information
File information
audio CD
MP3 / WMA /
JPEG :
: “CD-DA” will be displayed
Current Disc, SD Memory Card, or
folder name will be displayed
Track / File list : Track / File list in the original order
will be displayed
Operation
Guide : Press [RED] to go to the previous
page in the track / file list
Press [GREEN] to go to the next
page in the track / file list
Total playback time of all tracks (audio CD only)
Playback status
Note
• During the random playback, press [STOP
C] once to
set the resume point, and then press [PLAY B] to
resume random playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP
C] was pressed (MP3 / WMA / JPEG).
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
“
Track” appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until “
All” appears during playback.
• Playback from a desired track / file is not available
during random playback.
• In stop mode, press [RETURN] to switch to the
program playback mode.
• For a disc containing mixed MP3 and Windows
Media™ Audio files, random playback of those files
will be performed.
1 : 13 : 29
CD-DA
1 0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
3
4
5
6
7
- - / 16
1 6 2 3 4 5
Random Total
Page Down
e.g.) audio CD
1
2
3
4
5
6
I
NT
R
O
D
U
CT
IO
N
C
ON
NE
CTIONS
PLAY
BAC
K
F
UN
CTI
ON
SET
UP
O
TH
E
R
S