Quick reference guide – Tripp Lite B004-VPA2-K-R User Manual

Page 2

Quick Reference Guide

Notes:
1. Note that (x) denotes a number key for the selected port (x = 1~2).
2. By default, PC and Audio/Mic switching are simultaneous.
3. (Fx) denotes a function key (F1 or F2) at the top of the keyboard.
4. (y) denotes your choice of hot key command. Choose from ScrLk, CapsLock, Esc, F12 or NumLock.
5. Hot key convention: The hot key notation ScrLk + ScrLk + key, denotes that you should hit the individual key consecutively one at a time, not simultaneously.
6. Mouse Troubleshooting: If your mouse locks up or behaves abnormally, you can hit the following hot key commands to reset the mouse:
A) When using a PnP OS such as Windows 98 Second Edition, Wink2k, Win XP, etc., hit ScrLk + ScrLk + End for mouse reset.
B) When using a non-PnP OS such as Linux, NT4.0, etc., hit one of the following hot key commands for mouse reset according to your mouse confi guration

on the non-PnP OS. ScrLk + ScrLk + M + 1 for a 2-key mouse setting; ScrLk + ScrLk + M + 2 for a 3-key wheel mouse setting; ScrLk + ScrLk + M + 3

for a 5-key wheel mouse setting.

2-Port Compact PS/2 KVM Switch Operation Commands for Hot Keys/Push Buttons

Hot key sequence

: [ScrLk]* + [ScrLk]* + Command key(s)

* User-defi nable preceding sequence: Scroll Lock, Caps, Esc, F12 or Num Lock

Command

Hot Keys

Push Buttons

Description

Select PC Channel

(Select PC port and Audio/
Mic port, if simultaneous
operation is enabled)²

ScrLk + ScrLk + (x)¹

—

Selects PC channel

Select Audio/Mic
Channel²

ScrLk + ScrLk + (Fx)³

—

Selects Audio/Mic channel

Enable Simultaneous
PC and Audio/Mic
Switching²

ScrLk + ScrLk + Q

—

Enables simultaneous operation of

PC and Audio/Mic Switching

Disable Simultaneous
PC and Audio/Mic
Switching²

ScrLk + ScrLk + W

—

Disables simultaneous operation of

PC and Audio/Mic Switching

Choosing Next
PC Channel

(Select PC port and Audio/
Mic port, if simultaneous
operation is enabled)²

ScrLk + ScrLk +

(arrow up)

ScrLk + ScrLk +

(arrow down)

Press the push button to switch

to the next PC channel

Selects next PC channel

Choosing the Previous
PC Channel

ScrLk + ScrLk +

(Backspace)

—

Selects the previous PC channel

Defi ne Hot Key
Sequence

ScrLk + ScrLk + H + (y)

Press and hold down the last push

button (Port Selection Button) until

you hear two beeps, release the

button and then press the (y)

key

Sets the hot key sequence using

1 of 5 alternative keys

Console
Mouse/Keyboard Reset

ScrLk + ScrLk + End

—

Resets keyboard and mouse on the

console side

Autoscan

ScrLk + ScrLk + S

—

Autoscans through every connected

channel for quick screen browsing of

each channel (scan delay = 5 sec.)

Autoscan with
Programmable Delay
Time

ScrLk + ScrLk + S + (x)

x = 0~9

1 10”; 2 20”; 3 30”; 4 40”;
5 50”; 6 60”; 7 70”; 8 80”;

9 90”; 0 100”

—

Autoscans with a user-defi ned delay

time within a range of 5-100 seconds

Stop Autoscan

Press any key on keyboard

Press any button

Terminates Autoscan activity

200710180 93-2713

FCC Radio/TV Interference Notice

Note: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense. The user must use shielded cables and connectors with
this product. Any changes or modifi cations to this product not
expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

1 Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in
materials and workmanship for a period of one (1) year from the
date of initial purchase. TRIPP LITE’s obligation under this warranty
is limited to repairing or replacing (at its sole option) any such
defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from
TRIPP LITE or an authorized TRIPP LITE service center. Products
must be returned to TRIPP LITE or an authorized TRIPP LITE
service center with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered
and proof of date and place of purchase. This warranty does
not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modifi ed
in any way. EXCEPT AS PROVIDED HEREIN, TRIPP LITE
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation
or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifi cally, TRIPP LITE is not liable for any costs,
such as lost profi ts or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes,
claims by third parties, or otherwise.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for
your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply.
See website for details.

Use of this equipment in life support applications where failure of
this equipment can reasonably be expected to cause the failure
of the life support equipment or to signifi cantly affect its safety or
effectiveness is not recommended. Do not use this equipment in
the presence of a fl ammable anesthetic mixture with air, oxygen or
nitrous oxide.

The policy of Tripp Lite is one of continuous improvement.
Specifi cations are subject to change without notice.

All trademarks are the property of their respective owners.