TOA Electronics C-CV854D-3 CE - Manual (Page 17)

After detaching the dome cover from the case, do not lift the camera unit by the inner cover.
If lifted, the inner cover can be unhooked, and the camera could fall off, possibly resulting in personal injuries or
causing damage to the camera.
Cautions when Detaching/Attaching an Inner Cover
133-21-625-70
DETACHING AN INNER COVER
Detach the inner cover while pushing two of the sections indicated by arrows.
Push
Inner cover
Push
ATTACHING THE INNER COVER
1. Put the inner cover in the way that the lens comes to the opening slit of the inner cover. Fit one emboss of the
inner cover at a time in the cover-mounting hole while pushing two of the sections indicated by arrows.
2. After attaching the inner cover, check to be sure that inner cover is securely fitted to the camera unit by pulling
down the sections indicated by arrows tightly.
1
Cover mounting hole
Embossed section
of the inner cover
Push
Push
Opening slit
2
C-CV854D-3 CU
C-CV854D-3 CE