MAXWELL MW-3552 Y - Manual (Page 9)

Storage
− Before taking the unit away for storage, pour out water from the water tank (2) and from the
operating chamber (4), wipe the operating chamber (4) dry.
− Do not store the unit with water in the water tank or if water remains in the operating chamber.
− Keep the humidifier in a dry cool place out of reach of children.
TROUBLESHOOTING
Failure Possible causes Troubleshooting
The operating indicator
is not lighting, no steam
formation No voltage, no power
supply
Plug the unit
Plug in another, properly operating
device, to make sure that the socket is
in good operating condition.
The operating indicator
is lighting red, no steam
formation
There is no water in the
water tank. Fill the water tank with water.
“Steam” has an
unpleasant smell New device – it is
normal Unscrew the lid of the water tank, pour
out water and leave the unit for 12
hours in a cool dark place
Polluted or stagnant
water
Unplug the unit, remove the water
tank, pour out water, wash the water
tank, and fill the water tank with boiled
or distilled water.
Small intensity of “steam”
output
Polluted “sprayer” Unplug the unit and clean the sprayer.
Abnormal noise during
operation of the unit
The unit is placed on
the uneven or unstable
surface Unplug the unit and even the body
of the unit or move the humidifier to
another place.
NOTE:
Non-observance of rules for cleaning the unit from mineral deposits caused by hard water may
affect the overall performance of the unit. In this case clean the unit. If used water is too hard, use
household filters to purify water or mix tapping water with distilled water in proportion 1:1.
DELIVERY SET
Instruction manual – 1 pc.
Removable nozzle - 1 pc.
Removable water tank – 1 pc.
Removable water tank lid – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Power consumption: 30 W
9
ENGLISH
3552.indd 9 3552.indd 9 09.09.2011 15:00:44 09.09.2011 15:00:44