beautypg.com

Specifications – Tripp Lite Isotel Ultra User Manual

Page 3

background image

3

Isobar 2-6

Isobar 4

Isobar 6

Isobar 8 RM

AC Energy Absorption (Joules):

600

2200

2350

2350

Amp Spike Protection (Amps):

48,000

85,000

97,000

97,000

Dimensions (H x W x D):

2½ x 5 x 3½"

2½ x 6 x 3½"

2½ x 7 x 3½"

2½ x 9½ x 3½"

Isobar 4 Ultra

Isobar 6 Ultra

Isobar 8 Ultra

Isotel

AC Energy Absorption (Joules):

2200

2350

2350

2700

Amp Spike Protection (Amps):

85,000

97,000

97,000

92,000

Dimensions (H x W x D):

2½ x 6 x 3½"

2½ x 7 x 3½"

2½ x 9 x 3½"

2½ x 6 x 3½"

Isotel 4 Ultra

Isotel 6 Ultra

Isotel 8 Ultra Multimedia

AC Energy Absorption (Joules):

2700

2850

2850

Amp Spike Protection (Amps):

92,000

92,000

97,000

Dimensions (H x W x D):

2½ x 6 x 3½"

2½ x 7 x 3½"

2½ x 9 x 3½"

ALL MODELS:

• UL 1449 Listed (330V let-through, 1998)
• UL 1283 Listed (noise reduction)

Rated Input Voltage:

105 to 135V AC; 60 Hz; (120V AC nominal)

AC Outlets:

NEMA 5-15R

AC Line Cord:

6', 14 gauge, 3-conductor grounded
(12' on Isobar 8 Ultra, Isotel 8 Ultra Multimedia
and Isobar 8 RM models)

Controls:

Illuminated RED "ON/OFF" switch
(Remote "ON/OFF" switch with 7' cord on Isobar 8 RM)

High Frequency Noise Suppression:

> 20db @ 50Khz
> 40db @ 500Khz
> 75db @ 1Mhz
> 30db @ 6-1000Mhz

Transient Response Time:

Instantaneous*

* Transient amplitude reduction occurs faster than the clamp response of the varistors because of the high rejection

rate of the ISOBAR/ISOTEL filter networks.

TELEPHONE SURGE PROTECTION (ISOTEL AND ISOTEL ULTRA MODELS ONLY):

• UL 497A Listed (secondary communications protection)

Peak Transient Input Voltage:

6Kv, 10 microseconds

Energy Absorbtion:

140 Joules

Response Time:

Less than 5 nanoseconds

Clamping Voltage:

235 peak, ±10%

EMI Noise Reduction:

Up to 27 db

Input/Output Connector:

Female RJ11 jack; 2-wire, single line protection)
(Isotel 6 Ultra features 4-wire, 2-line protection)

FCC PART 68 NOTICE (U.S. ONLY)

If your Isotel or Isotel Ultra causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible,
they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file
a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect
the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, Isotel or Isotel Ultra, please contact the Manager of Technical Support; Tripp Lite; 1111 W. 35th
Street, Chicago, Illinois 60609; Phone: (773) 869-1234, for repair/warranty information. The telephone company may ask you to disconnect
this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs
that can be made by the customer to the Isotel or Isotel Ultra. This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for
information.)

Specifications

This manual is related to the following products: