Tripp Lite IS1000 - Manual (Page 2)

A 6-ft. cord with NEMA 5-15P plug allows for flexible installation, while 4 NEMA 5-15R outlets allow you to plug your standard equipment into the
IS1000 without any adapters or custom power cords. Operation is easy; simply plug the IS1000 into a grounded, 3-prong utility outlet, plug your
equipment in and turn the power on. The lighted power switch allows for simple one-touch power control of all connected equipment.
Peace of Mind
The IS1000 comes backed by a 2-year warranty.
Specifications
OVERVIEW
Amp Capacity 8.3A at 120V AC
Efficiency 96%
Form Factor Small tower format, wall mountable
Input Plug Type NEMA 5-15P
Let-through Voltage
(Combination Wave) L-N:
Let-through Voltage (Ring
Wave) L-N:
Noise Suppression Rating 33-65dB normal mode; >80dB common mode
Nominal Voltage / Frequency 120V / 60Hz
Output Receptacle Qty / Type 4 NEMA 5-15R
Over Current Protection Yes, 9.0A circuit breaker
Suppression Joule Rating 680 Joules
Surge Test Conditions Per ANSI/IEEE C62.41 - IEEE587 Cat. A & B test waveforms
Total Harmonic Distortion less than 1%
Transformer Type Low impedence transformer-based line isolation transformer
VA / Watt Capacity 1000
INPUT
Input cord length (ft.) 6
Input cord length (m) 1.83
PHYSICAL
Shipping Dimensions
(HWD/in) 6.25 x 13 x 7.5
Shipping Dimensions
(HWD/cm) 15.88 x 33 x 19.1
Shipping weight (lbs) 24.6
Shipping weight (kg) 11.15
Unit Dimensions (HWD/in) 5.5 x 6.25 x 8.5
Unit Dimensions (HWD/cm) 13.97 x 15.88 x 21.6
Unit weight (lbs) 22.6
Unit weight (kg) 10.25