Maintaining the trackball safety measures, Things to remember, Maintaining the trackball – Targus 400-0170-001A User Manual
Page 13: Batteries, Safety measures

13
Targus Wireless Multimedia Presenter
Maintaining the Trackball
To improve the performance of your trackball, keep it free of
dust and dirt by following the cleaning procedures
described below.
1 Rotate the trackball retainer counter-clockwise until it's
loose.
2 Remove the retainer and the trackball.
3 Clean the trackball using a lint-free cloth and a non-
alcohol solution.
4 Replace the trackball and the retainer. Turn the retainer
clockwise until it is secure.
Things to Remember
Batteries
General
› You must establish a communications link every time
you change the batteries.
› To extend the life of your batteries, turn off the pre-
senter when not in use.
› The LED will flash to indicate the batteries need to be
changed.
Safety Measures
› Never point the presenter at people, especially their
faces, or look directly into the presenter’s laser beam,
to avoid possible eye damage.
› Avoid pointing the presenter’s laser beam at a mirror or
other highly reflective surface.