TOA Electronics TA 1400 - Manual (Page 3)

2 APPROVALS
This equipment conforms to the requirements of the EMC directive 89/336/EEC,
amended by 92/31/EEC and 93/68/EEC and the requirements of the Low Voltage
Directive 73/23/EEC, amended by 93/68/EEC.
Standard Applied EMC Emission EN55103-1, E3
EMC Immunity EN55103-2, E3, with S/N below 1% at normal operation level.
Electrical Safety EN60065, Class
3 WARNINGS
3.1 Explanation of graphical symbols
The lightning symbol within a triangle
is intended to alert the user to the
presence of un-insulated “dangerous voltage”
within the amplifier’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to humans.
The exclamation point within a triangle
is intended to alert the user to
presence of important operating and service
instructions in the literature accompanying
the product.
!
3.2 WARNING
To reduce risk of fire or electric shock, do not
expose this apparatus to rain or moisture
.
3.3 CAUTION
To reduce the risk of fire or electric shock, do
not remove screws. No user-serviceable
parts inside. Refer servicing to qualified
service personnel.
3.4 Important Safety Instructions
Before using your amplifier, be sure to carefully read the applicable items of these
operating instructions and the safety suggestions
1. Keep this manual for future reference.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this unit near water. Do not spill water or other liquids into or on the unit. Do not
operate the amplifier while wet or standing in liquid.
5. Clean only with dry cloth.
6. Do not block the air intake or exhaust ports. Install the unit in accordance with the
instructions.
!
7. Do not operate the amplifier near heat producing devices such as radiators, heat registers,
stoves or other apparatus that produce heat.
8. Always operate the unit with the chassis ground wire connected to the electrical safety
earth. Do not defeat the safety purpose of a grounding-type plug. A grounding type plug
has two pins and a third grounding prong. The third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
9. Connect only to AC power outlets rated 230-240V (or 100-120V), 50-60Hz
Tannoy Limited
TA 1400 User Manual 11-06-02
2