Tricity Bendix MDB700 - Manual (Page 27)

27
Before calling an Engineer please carry out the
following checks, you may be able to solve the
problem without the expense of an Engineer.
If our Service Engineer finds that the problem is
listed below you will be charged for the call whether
or not the appliance is under guarantee.
The grill and oven do not work:
* Check that the appliance has been wired in
and is switched on at the wall.
* Check that the main appliance fuse is
working.
If you have checked the above:
* Switch OFF the appliance at the wall and
allow the appliance to cool for a couple of
hours. Switch ON again. The appliance
should now be working normally.
The grill works but the oven does not:
* Check that the grill control is in the OFF
position.
* Switch OFF at the wall and allow the
appliance to cool. Check that the oven is
now working normally.
The grill does not work or cuts out after being
used for a long period of time:
* Leave the oven to cool for a couple of hours.
Check that the grill is now operating
normally. Ensure that the door is left open
during grilling.
* If the cooling fan fails the grill will not work
correctly. Contact your local Service Force
Centre.
The oven temperature is too high or too low:
* Check that the recommended temperatures
are being used (see page 21). Be prepared
to adjust the temperature up or down by
10°C to achieve the results you want.
* Care should be taken if using an oven
thermometer to check oven temperatures as
they may be inaccurate.
The following factors should be considered.
* Ensure you purchase an accurate good
quality instrument.
* Ovens will cycle about a set temperature and
will not be constant.
The oven is not cooking evenly.
* Check that the appliance is correctly
installed and that it is level.
* Check that the recommended temperatures
and shelf positions are being used.
The oven fan is noisy.
* Check that the oven is level.
* Check that bakeware and shelves are not
vibrating in contact with the back panel in the
oven.
SOMETHING NOT WORKING?