Technicolor - Thomson CS84 - Manual (Page 7)

EN
Settings
5
Display
Setting the Clock
1. Press CLOCK•TIMER to enter clock setting
mode. CLK XX:XX will show on the display.
2. Press TUNING - or + to set the hour.
3. Press PROG•SET•CLEAR to shift to the minute
digits.
4. Press TUNING - or + to set the minute.
5. Press PROG•SET•CLEAR to confirm the
setting.
Setting the Timer
1. Press CLOCK•TIMER twice to enter timer on
setting mode. ON XX:XX will show on the
display.
2. Press TUNING - or + to set the hour.
3. Press PROG•SET•CLEAR to move to the
minute digits.
4. Press TUNING - or + to set the minute digits.
5. Press PROG•SET•CLEAR to move to source
selection.
6. Press TUNING - or + to select source (Tape /
Tuner / CD / Rec TU)
7. Press PROG•SET•CLEAR to move to volume
setting.
8. Press TUNING - or + to select desired volume
level.
9. Press PROG•SET•CLEAR to move to timer off
time setting. OFF XX:XX will show on the
display.
10. Repeat steps 3-5 to set timer off hour and
minute.
11. Press PROG•SET•CLEAR to confirm settings.
Timer will be activated automatically after settings
are finished.
Activating the Timer
Press and hold CLOCK•TIMER for 2 seconds on the
main unit to activate and deactivate the timer
function.
If clock time is not set, SET CLK will flash on the
display when you try to activate the timer. Follow
instructions under “Setting Clock Time” to set
clock.
If timer settings have not been entered, SET TMR
will flash on the display when you try to activate
the timer. Follow instructions under ”Setting the
Timer” to enter timer settings.
If timer off time is set as the same as timer on
time, TIMER NG will flash on the display. Set the
correct timer off time again.
Setting Sleep Time
Press SLEEP on the remote control to toggle
among OFF, 90, 80, 70, 60, 50, 40, 30, 20, and 10
minutes.
R P
Note: Note: Note: Note: Note:
Thomson models show time in 24-hour
standard.
CS84 EN new 1/9/04, 2:13 PM 8