Telex AUDIOCOM BP-2000 - Manual (Page 2)

GENERAL
The Audiocom® BP-2000 and BP-1000 are microprocessor
controlled one- and two-channel intercom belt packs. An
internal switch and jumper setting allows the units to be used
with Clear-Com® components, if desired. Other internal
switch and jumper settings allow the unit to be uniquely
configured to the operator’s requirements.
FCC STATEMENT
This equipment uses, and can radiate radio frequency energy
that may cause interference to radio communications if not
installed in accordance with this manual. The equipment has
been tested and found to comply with the limits of a Class A
computing device pursuant to Subpart B, Part 15 of FCC
Rules which are designed to provide reasonable protection
against such interference when operated in a commercial
environment. Operation of this equipment in a residential
area may cause interference which the user (at his own
expense) will be required to correct.
This product meets the Electromagnetic Compatibility
Directive, 89/336/EEC.
®Audiocom is a registered trademark of Telex Communications, Inc.,
™ Burnsville, Minnesota 55337
®Clear-Com is a registered trademark of Clear-Com Intercom Systems
1