Tissot Chronographs Watch G10 - Manual (Page 3)

Chronographs G10
*
www.tissot.ch 143_EN / 12.09 3/4
Simple timing
The "simple timing" function enables you to measure isolated events.
1 START
2 STOP
Time readout (as per example above)
- 5 minutes,
- 57 seconds,
- 7/10ths of a second
3 Reset
NB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer to
the RESETTING THE COUNTERS paragraph.
Note : All the timing functions are available with the crown pressed into position I.
ADD function
The ADD function enables you to measure consecutive events without having to reset in between. Each time
is added to the previous total.
1 START
2 STOP Readout
3 RESTART
4 STOP Readout
5 RESTART
6 STOP Readout
X Reset counters
SPLIT-TIME function
The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting
timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time.
1 START
2 SPLIT 1
Time 1 readout (as per fig. 2)
- 5 minutes,
- 4 seconds,
- 6/10ths of a second
3 RESTART (catchup)
4 SPLIT 2
Time 2 readout
- 15 minutes,
- 36 seconds,
- 8/10ths of a second
5 RESTART (catchup)
6 STOP
Final time readout (cumulative time)
- 25 minutes,
- 18 seconds,
- 4/10ths of a second
7 Reset counters