Tlm, tlf, tld, Page 24, April, 2007 – Tyler Refrigeration Lift Front Straight Glass Meat/Seafood/Deli Merchandiser TLF User Manual
Page 24
TLM, TLF, TLD
Page 24
TYPE OF CLEANING
CLEANING AGENT*
APPLICATION METHOD**
EFFECT ON FINISH
Paste NuSteel or DuBois
Rub with dry cloth. Use a
Use in direction of polish lines
Temp
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Cooper’s Stainless Steel
Apply with damp sponge or.
Use in direction of polish lines
Cleaner, Revere Stainless
cloth.
on No. 4 (polished) finish.
Steel Cleaner
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Grade F Italian pumice, Steel
Rub with a damp cloth.
Use in direction of polish lines
Bright, Lumin Cleaner, Zud or
on No. 4 (polished) finish.
Restoro
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Penny-Brite or Copper-Brite
Rub with a dry cloth. Use a
Use in direction of polish lines
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Heat tint or heavy
Penny-Brite or Copper-Brite
Rub with a dry cloth.
Use in direction of polish lines
discoloration
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Paste NuSteel or DuBois
Rub with dry cloth. Use a
Use in direction of polish lines
Temp
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Revere Stainless Steel
Apply with a damp sponge
Use in direction of polish lines
Cleaner
or cloth.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Allen Polish, Steel Bright,
Rub with a damp cloth.
Use in direction of polish lines
Wyandotte, Bab-O or Zud
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Burnt-on foods and
Easy-Off, De-Grease-It, 4-6%
Apply generous coating.
Excellent removal, satisfactory
grease, fatty acids,
hot solution of such agents
Allow to stand for 10-15 min.
for use on all finishes.
milkstone (where swab- as trisodium tripolyphospate, Repeated application may
bing or rubbing is not
or 5-15% caustic soda
be necessary.
practical)
solution
Tenacious deposits,
Oakite No. 33, Dilac, Texo 12, Swab and soak with clean
Satisfactory for use on all
rusty discolorations,
Texo N.Y., Flash-Klenz,
cloth. Let stand 15 minutes
finishes.
industrial atmospheric
Caddy Cleaner, Turco Scale
or more according to direc-
stains
4368 or Permag 57.
tions on package. Rinse
and dry.
Hard water spots
Vinegar
Swab or wipe with a cloth.
Satisfactory for use on all
and scale
Rinse with water and dry.
finishes.
5% oxalic acid, 5% sulamic
Swab or soak with a cloth.
Satisfactory for use on all
acid, 5-10% phospheric acid,
Let stand 10-15 minutes.
finshes. Effective on tenacious
or Dilac, Oakite No. 33,
Always follow with neutralizer deposites or where scale has
Texo 12 or Texo N.Y.
rinse, and dry.
built up.
April, 2007