Targus NOTEWORTHY 400-0084-001A - Manual (Page 12)

12
Playing DVD Movies
To play back movies, you must have a DVD-ROM decoder installed in your computer or have a DVD
player application set up under the Windows
® operating system.
NOTE: The Windows NT ® operating system does not support DVD movie playback.
Hot Swapping
You can connect and disconnect the external drive while the computer is running. To attach the
external drive, just insert the PC Card cable into your computer’s Type II PC Card slot.
NOTE: If you are running the Windows NT ® operating system, you must have the Softex Card
Execuitve 2.0 card and socket services software installed on your computer in order to hot swap the
drive.
To remove the PC Card cable while the computer is turned on:
1 Double-click the PC Card icon in the system tray or click Start, Settings, and Control Panel.
2 Double-click PC Card (PCMCIA).
3 Highlight the PC Card cable and click Stop.
The message “You may now safely remove the card” appears.
4 Remove the PC Card cable from your computer.
Writing and Rewriting CDs (Model NW930 Only)
To write and rewrite CDs, if you are running the Windows ® 98/Me/2000/XP operating systems, you
must install writing software. For your convenience, the Easy CD Creator software is supplied. To
install the Easy CD Creator software:
1 Insert the supplied CD-ROM into the external drive (or your computer’s internal CD-ROM
drive if it has one).
2 If setup does not begin automatically, click Start, then Run, and enter D:\setup.exe (where D: is
the path of the CD-ROM or combo drive) and then click OK.
3 Follow the on-screen instructions to complete installation.
For more information on how to use the Easy CD Creator application, refer to the documentation on
the CD-ROM.