12 technical data, 13 eco (low-radiation) mode – Topcom BUTLER 1600 User Manual
Page 17
![background image](/manuals/213921/17/background.png)
Topcom Butler 1600/Twin/Triple/Quattro
17
Topcom Butler 1600/Twin/Triple/Quattro
ENGLIS
H
12 Technical Data
Range:
up to 300 m in open space
up to 50 m in buildings
Dialling options:
DTMF (tone) and Pulse
Batteries:
2 x 1.2V, 600 mAh AAA Type NiMH rechargeable
Max. standby time:
approx. 100 hours
Max. talk time:
11 hours
Ambient temperature:
+5 °C to +45 °C
Permitted relative air humidity:
25 to 85 %
Power supply base adapter:
220/230V , 50 Hz
Memories
50 with max. 24 digits and 14 characters
13 ECO (low-radiation) mode
•
This cordless telephone (compliant with the DECT standard) facilitates low-radiation
operation.
•
The radiation intensity of the radio signal between the base station and handset is
reduced to a minimum when the handset is on the base station.
•
Only when the handset is removed from the base station or a call is received does the
radiation intensity of the radio signal increase to the normal strength.
•
This does not mean that normal DECT radiation is harmful to health.
•
The low-radiation mode prevents unnecessary DECT radiation load when no
communication is required between the base station and handset.
•
For technical reasons, no additional handsets can be operated in low-radiation mode (an
additional handset that is not located in the immediate vicinity of the base station would
always be "searching for base station" due to the weak radio signal).
•
Low-radiation mode is enabled in the factory settings.
•
Low-radiation mode is automatically disabled if you log on an additional handset.
•
Low-radiation mode is automatically enabled again when you log off all additional
handsets (only one handset may be logged onto the base station).
•
The procedure for logging handsets on and off is explained in the User Manual.